S2Dynamics warrants to the original user and consumer (“consumer” or “you”) that any goods supplied by S2Dynamics shall be free from defects in material and workmanship under normal use and service for one (2) years or twenty four thousand (24,000) miles from the date of purchase by the original consumer.
This EXPRESS LIMITED WARRANTY does not apply where there has been a failure of the goods due to alteration, repair subsequent to the purchase, misuse, improper installation, neglect or accident. Electrical and Aftermarket Performance components/parts are excluded from this EXPRESS LIMITED WARRANTY and cannot be returned once they have been installed. Such components are subject only to their respective manufacturer’s warranties (if applicable).
If you believe you have received defective goods or sub-standard services from S2Dynamics, you must immediately notify S2Dynamics of why you believe the goods or services are faulty. S2Dynamics will either request you return the defective goods or bring the vehicle in for inspection, or S2Dynamics will rely upon the information you have provided (either via phone or with photographs) to determine whether the goods or services are in fact faulty. If any goods are proven to be defective, then S2Dynamics, at its sole option, will choose to repair or replace the defective goods, or issue the customer a credit toward the purchase of goods from S2Dynamics in the future. The customer is responsible for any and all transportation or shipping and handling costs associated with the inspection, repair or replacement of defective goods. Should the warranty provided by the manufacturer of the goods sold to you by S2Dynamics contain terms and conditions more favorable than this EXPRESS LIMITED WARRANTY, you agree that the manufacturer’s warranty, and not S2Dynamics EXPRESS LIMITED WARRANTY, shall be your sole and exclusive solution and you will no longer hold S2Dynamics liable for any and all actions.
Except as provided in this EXPRESS LIMITED WARRANTY, S2Dynamics makes NO other EXPRESS OR IMPLIED WARRANTIES of any kind, whether as to MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If any of S2Dynamics sales staff and/or representatives has made any verbal statements about the goods, these statements do not constitute warranties and are not part of the S2Dynamics EXPRESS LIMITED WARRANTY.
In the case of products that have been labeled by their manufacturer as being “For Off Road Use Only” this EXPRESS LIMITED WARRANTY does not apply and such parts are not covered. Defects or premature failures of products labeled “Off Road Use Only” are not covered by this warranty or S2Dynamics and are subject only to their manufacturer’s warranty (if any).
S2Dynamics shall not be liable for incidental or consequential damages you allege may have occurred as a result of use of goods from S2Dynamics. This exclusion of liability for incidental and consequential damages includes but is not limited to, claims for lost profits, any costs or expenses for labor, transportation or other expenses incurred by the use or sale of said defective goods. This EXPRESS LIMITED WARRANTY gives you specific legal rights and you may have other rights which vary from state to state.
S2Dynamics reserves the right to modify or otherwise make changes to the EXPRESS LIMITED WARRANTY at any time, without notice.
S2Dynamics Hours:
8am-6pm Monday-Friday
Phone: (301) 881-1283
S2 Dynamics is Authorized for the Limited Purpose of Replacing Keys for Volkswagen and Audi Vehicles. Our Services: Air Conditioning Service – Battery – Brake Service – Check Engine Light – Cooling System Service – Emission Control Repair – REVO Software tuning – Maintenance Service / Tires- Maryland State Inspection – Oil Change Service – Power Steering Service – Suspension / Wheel Repairs – Transmission and Drivetrain Service
Copyright © 2009–2018 S2Dynamics.Com
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
REPLACE: AUTOMATIC CVT TRANSAXLE FLUID
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
REPLACE: SPARK PLUGS
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
REPLACE: AUTOMATIC CVT TRANSAXLE FLUID
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
REPLACE: SPARK PLUGS
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVE BELTS
Ribbed V-belt
Check condition and replace if necessary. Check tension of belt drive with a manual tensioner and retention if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
REPLACE: AUTOMATIC CVT TRANSAXLE FLUID
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
REPLACE: SPARK PLUGS
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: FRONT & REAR AXLE FLUID
Check for excessive play. Check dust seals on ball joints and tie rod ends.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: MANUAL TRANSAXLE FLUID
Check for damage/leaks.
INSPECT: ON-BOARD DIAGNOSTICS
Check fault memory.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check for wear and damage. Check tire pressure. Check renewal data of tire repair set (where applicable).
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: TIRES/SPARE TIRE
Check tire pressure, damage and tread depth.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROTATE: TIRES
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n
MILEAGE DETAILS
CLEAN: AIR CLEANER SCREEN
Clean snow screen for air cleaner.
CLEAN: SLIDING ROOF
Clean guide rails and lubricate with grease.
REPLACE: AUTOMATIC CVT TRANSAXLE FLUID
REPLACE: CABIN AIR FILTER
Dust & Pollen Filter
REPLACE: ENGINE OIL & FILTER
In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
REPLACE: SPARK PLUGS
INSPECT: BATTERY
Check for clean terminals (no corrosion), properly mounted housing and no damage; replace if necessary. Also, check the acid level of battery only if the level can be seen through the housing and fill if necessary.
INSPECT: BRAKE SYSTEM
Check for damage and leaks. Check thickness of pads and brake fluid level.
INSPECT: COOLING SYSTEM
Check coolant level, add if necessary.
INSPECT: DRIVE BELTS
Ribbed V-belt
Check condition and replace if necessary. Check tension of belt drive with a manual tensioner and retention if necessary.
INSPECT: DRIVESHAFT BOOTS
INSPECT: ENGINE
Check engine compartment for leaks.
INSPECT: EXHAUST SYSTEM
Check for damage/leaks.
INSPECT: FINAL DRIVE OIL
Auto and Manual transmission, check for damage/leaks.
INSPECT: FRONT & REAR AXLE FLUID
Check for excessive play. Check dust seals on ball joints and tie rod ends.
INSPECT: HORN OPERATION
Check function and condition.
INSPECT: LIGHTS & CONTROLS
Inspect front lighting – Check function of parking lights, low beams, high beams, fog lights, blinkers & hazard lights. Inspect rear lighting – Check function of brake lights (including third brake light), tail lights, back-up lights, rear fog lights, license plate lights, blinkers & hazard lights.
INSPECT: MANUAL TRANSAXLE FLUID
Check for damage/leaks.
INSPECT: ON-BOARD DIAGNOSTICS
Check fault memory.
INSPECT: PLENUM PANEL
Remove cover for plenum panel to check water drain and clean if necessary.
INSPECT: TIRES/SPARE TIRE
Check for wear and damage. Check tire pressure. Check renewal data of tire repair set (where applicable).
INSPECT: UNDERBODY CONTACT POINTS & LINKAGE
Check for damage/leaks.
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check adjustment and function. Add fluid as needed.
INSPECT: WIPER BLADES
Check condition and replace if necessary.
RESET: SERVICE INTERVAL INDICATOR/DISPLAY
RESET: TIRE PRESSURE MONITORING SYSTEM SENSORS
ROAD-TEST: VEHICLE
Check braking, kick-down, steering, electrical, heating and ventilation systems, air conditioning, (ASL) Automatic Shift Lock, power accessories and reset driver information display.
MILEAGE DETAILS
INSPECT: BRAKE SYSTEM
Check brake pad thickness and disc condition (front and rear).
INSPECT: HEADLIGHTS
Check cleaning nozzle functionality (if equipped).
INSPECT: WINDSHIELD WIPER & WASHER SYSTEMS
Check cleaning nozzle functionality. Check fluid level; add if n